Inquip supply the market leading Kinder range of equipmet safety & materials handling products

Return Idlers Guards
To comply with Australian standards, all conveyors must have guarding for pinch points within reach of operators. Where pinch points on the underside of a conveyor are few and far between, it can be costly to guard the entire return section of the belt, or fiddly to construct a guard at each return roller.

  • Kinder have developed the K-Protector which is a simple retro fit guard which bolts or clamps to the idler frame. It has quick release guard panels which allow easy access for maintenance and comes in the full range of idler sizes with custom fit options available.

Motor Guards
In many dusty / dirty facilities, the build up dust and debris on equipment motors reduces the cooling efficiency of the motor, causing motor burn out. There is also the occasional impact damage to the motor and fan.

  • The Kinder Motorshield range is a lightweight durable curved shield manufactured to suit standard IEC frame motor sizes.
    • It covers the full length of the motor and extends past the fan, providing not only falling debris protection, but prevents blockage of the motor cooling flutes down the body of the motor.
    • The close fit to the motor ensure the air flow generated by the fan is direct down the full body of the motor, improving air flow and heat transfer by 40%.

Metal Detectors and Separators
In most conveying applications there are times when metal items (maintenance tools / loosed bolts , brackets/ ground engaging tools / teeth etc) find their way onto conveyors inadvertently. These metal objects need to be removed before they damage downstream equipment or contaminate the product.

  • Metal Detectors
    • Magnetic search coils are located below the belt of a non magnetic product. They detect the presence of metallic objects in the conveyed material above and send / close a signal  for the site system to activate corrective measures.
  • Magnetic Separators
    • Permanent Magnet plates attract unwanted ferrous material from the material stream. Removal / cleaning on the magnet is manual and periodical.
    • Electromagnetic Separators with / without automatic cleaning
    • Magnetic Pulleys attract ferrous materials as they pass over the drum, preventing it from following the product into the conveyor outlet stream. When the belt moves past the drum, the magnet affect is lost and the ferrous material drops off the belt into a strategically located debris chute.

      For further information please click here for catalogues